Operations
Home / Netra / Operations
Operations
As the product moves through Conveyor 1, each tablet is inspected by five cameras (C1-C5) placed precisely to capture its image from the top (C1) and from four lateral angles (C2-C5). Any tablet that fails this inspection is pneumatically discarded through the first rejection point (R1) into an internally provided rejection bin.
The filtered tablet stream now travels along Conveyor 2, where the vacuum-pull reverses, and the underside of the tablet is inspected by the bottom camera (C6). Any defective product at this stage is rejected through the second rejection point (R2) into the internally provided rejection bin.
The flawless product stream is collected in a separate bin at the discharge end of the machine.
Maintenance & Troubleshooting
Your Netra VS6 has inbuilt self-diagnostic modes for periodic maintenance and a special screen for hardware testing. In addition, each component has overrides for full manual testing. Software driven simplified troubleshooting is a step-by-step process with clear on-screen instructions. Every situation that could possibly arise and would be in the user’s scope to set right, is covered.
